Supporting simulation in industry through the application of grid computing

An increased need for collaborative research, together with continuing advances in communication technology and computer hardware, has facilitated the development of distributed systems that can provide users access to geographically dispersed computing resources that are administered in multiple computer domains. The term grid computing, or grids, is popularly used to refer to such distributed systems. Simulation is characterized by the need to run multiple sets of computationally intensive experiments. Large scale scientific simulations have traditionally been the primary benefactor of grid computing. The application of this technology to simulation in industry has, however, been negligible. This research investigates how grid technology can be effectively exploited by users to model simulations in industry. It introduces our desktop grid, WinGrid, and presents a case study conducted at a leading European investment bank. Results indicate that grid computing does indeed hold promise for simulation in industry

A comparison of CMB- and HLA-based approaches to type I interoperability reference model problems for COTS-based distributed simulation

Commercial-off-the-shelf (COTS) simulation packages (CSPs) are software used by many simulation modellers to build and experiment with models of various systems in domains such as manufacturing, health, logistics and commerce. COTS distributed simulation deals with the interoperation of CSPs and their models. Such interoperability has been classified into six interoperability reference models. As part of an on-going standardisation effort, this paper introduces the COTS Simulation Package Emulator, a proposed benchmark that can be used to investigate Type I interoperability problems in COTS distributed simulation. To demonstrate its use, two approaches to this form of interoperability are discussed, an implementation of the CMB conservative algorithm, an example of a so-called “light” approach, and an implementation of the HLA TAR algorithm, an example of a so-called “heavy” approach. Results from experimentation over four federation topologies are presented and it is shown the HLA approach out performs the CMB approach in almost all cases. The paper concludes that the CSPE benchmark is a valid basis from which the most efficient approach to Type I interoperability problems for COTS distributed simulation can be discovered

Grid-enabling FIRST: Speeding up simulation applications using WinGrid

The vision of grid computing is to make computational power, storage capacity, data and applications available to users as readily as electricity and other utilities. Grid infrastructures and applications have traditionally been geared towards dedicated, centralized, high performance clusters running on UNIX flavour operating systems (commonly referred to as cluster-based grid computing). This can be contrasted with desktop-based grid computing which refers to the aggregation of non-dedicated, de-centralized, commodity PCs connected through a network and running (mostly) the Microsoft Windowstrade operating system. Large scale adoption of such Windowstrade-based grid infrastructure may be facilitated via grid-enabling existing Windows applications. This paper presents the WinGridtrade approach to grid enabling existing Windowstrade based commercial-off-the-shelf (COTS) simulation packages (CSPs). Through the use of a case study developed in conjunction with Ford Motor Company, the paper demonstrates how experimentation with the CSP Witnesstrade and FIRST can achieve a linear speedup when WinGridtrade is used to harness idle PC computing resources. This, combined with the lessons learned from the case study, has encouraged us to develop the Web service extensions to WinGridtrade. It is hoped that this would facilitate wider acceptance of WinGridtrade among enterprises having stringent security policies in place

Short-Interval Cortical Inhibition and Intracortical Facilitation during Submaximal Voluntary Contractions Changes with Fatigue

This study determined whether short-interval intracortical inhibition (SICI) and intracortical facilitation (ICF) change during a sustained submaximal isometric contraction. On 2 days, 12 participants (6 men, 6 women) performed brief (7-s) elbow flexor contractions before and after a 10-min fatiguing contraction; all contractions were performed at the level of integrated electromyographic activity (EMG) which produced 25 % maximal unfatigued torque. During the brief 7-s and 10-min submaximal contractions, single (test) and paired (conditioning–test) transcranial magnetic stimuli were applied over the motor cortex (5 s apart) to elicit motor-evoked potentials (MEPs) in biceps brachii. SICI and ICF were elicited on separate days, with a conditioning–test interstimulus interval of 2.5 and 15 ms, respectively. On both days, integrated EMG remained constant while torque fell during the sustained contraction by ~51.5 % from control contractions, perceived effort increased threefold, and MVC declined by 21–22 %. For SICI, the conditioned MEP during control contractions (74.1 ± 2.5 % of unconditioned MEP) increased (less inhibition) during the sustained contraction (last 2.5 min: 86.0 ± 5.1 %; P \u3c 0.05). It remained elevated in recovery contractions at 2 min (82.0 ± 3.8 %; P \u3c 0.05) and returned toward control at 7-min recovery (76.3 ± 3.2 %). ICF during control contractions (conditioned MEP 129.7 ± 4.8 % of unconditioned MEP) decreased (less facilitation) during the sustained contraction (last 2.5 min: 107.6 ± 6.8 %; P \u3c 0.05) and recovered to 122.8 ± 4.3 % during contractions after 2 min of recovery. Both intracortical inhibitory and facilitatory circuits become less excitable with fatigue when assessed during voluntary activity, but their different time courses of recovery suggest different mechanisms for the fatigue-related changes of SICI and ICF

Commercial-off-the-shelf simulation package interoperability: Issues and futures

Commercial-Off-The-Shelf Simulation Packages (CSPs) are widely used in industry to simulate discrete-event models. Interoperability of CSPs requires the use of distributed simulation techniques. Literature presents us with many examples of achieving CSP interoperability using bespoke solutions. However, for the wider adoption of CSP-based distributed simulation it is essential that, first and foremost, a standard for CSP interoperability be created, and secondly, these standards are adhered to by the CSP vendors. This advanced tutorial is on an emerging standard relating to CSP interoperability. It gives an overview of this standard and presents case studies that implement some of the proposed standards. Furthermore, interoperability is discussed in relation to large and complex models developed using CSPs that require large amount of computing resources. It is hoped that this tutorial will inform the simulation community of the issues associated with CSP interoperability, the importance of these standards and its future

The effect of hydrogen peroxide on uranium oxide films on 316L stainless steel

For the first time the effect of hydrogen peroxide on the dissolution of electrodeposited uranium oxide films on 316L stainless steel planchets (acting as simulant uranium-contaminated metal surfaces) has been studied. Analysis of the H2O2-mediated film dissolution processes via open circuit potentiometry, alpha counting and SEM/EDX imaging has shown that in near-neutral solutions of pH 6.1 and at [H2O2] 0.1 mol dm(-3) the uranium oxide film, again in analogy to common corrosion processes, behaves as if in a transpassive state and begins to dissolve. This transition from passive to transpassive behaviour in the effect of peroxide concentration on UO2 films has not hitherto been observed or explored, either in terms of corrosion processes or otherwise. Through consideration of thermodynamic solubility product and complex formation constant data, we attribute the transition to the formation of soluble uranyl-peroxide complexes under mildly alkaline, high [H2O2] conditions - a conclusion that has implications for the design of both acid minimal, metal ion oxidant-free decontamination strategies with low secondary waste arisings, and single step processes for spent nuclear fuel dissolution such as the Carbonate-based Oxidative Leaching (COL) process. (C) 2015 Elsevier B.V. All rights reserved

The SISO CSPI PDG standard for commercial off-the-shelf simulation package interoperability reference models

For many years discrete-event simulation has been used to analyze production and logistics problems in manufactur-ing and defense. Commercial-off-the-shelf Simulation Packages (CSPs), visual interactive modelling environ-ments such as Arena, Anylogic, Flexsim, Simul8, Witness, etc., support the development, experimentation and visua-lization of simulation models. There have been various attempts to create distributed simulations with these CSPs and their tools, some with the High Level Architecture (HLA). These are complex and it is quite difficult to assess how a set of models/CSP are actually interoperating. As the first in a series of standards aimed at standardizing how the HLA is used to support CSP distributed simula-tions, the Simulation Interoperability Standards Organiza-tion’s (SISO) CSP Interoperability Product Development Group (CSPI PDG) has developed and standardized a set of Interoperability Reference Models (IRM) that are in-tended to clearly identify the interoperability capabilities of CSP distributed simulations

Science Reproducibility and Reusability with FutureGateway and a Zenodo-like repository: the PALMS experiment

Open Science (OS) is a powerful and novel paradigm to share knowledge across multidisciplinary scientific communities with the aim to improve the quality of science. One of the most important OS enablers are the FAIR principles, which involves the way to Find, Access, Interoperate and Reuse research data. In most of the cases published scholarship materials are not linked with computed datasets, open source software and/or virtualized computing environments and OS currently lacks of means helping to reproduce and eventually reuse cited results exploiting public or private distributed computing infrastructures (DCIs). Moreover, from the final user point of view, the best option would be the use of graphical user interfaces (GUIs) normally hosted by a Science Gateway (SG) built for a specific scientific community. The FutureGateway Framework (FGF) consists of a complete software toolkit made of different parts such as: source codes, utilities, libraries and APIs capable to comfortably build reliable Science Gateways and link them to one or more DCIs avoiding any usage complexity from the final user perspective. Moreover, since SGs based on the FGF are capable to keep track of who is accessing the DCIs, not only its usage ensures OS-compliant reproducibility and reusability but also provides a possible answer in protecting or at least simply tracking people who are accessing data and this is one of the aspects that today still makes the adoption of the OS a delicate matter. This work presents and explains how the use of the EGI's Science Software on Demand (SSOD) service, built using the FutureGatewayFramework in conjunction with the INFN Open Access Repository (OAR), based on Zenodo software, can reproduce/reuse the outputs of the agent-based Physical Activity Lifelong Modelling & Simulations (PALMS) experiment

The Reproducibility and Reusability Platform

Poster presentation at OR2020, Stellenboch, South Africa 1st - 4th June 2020

Science Reproducibility and Reusability with FutureGateway and a Zenodo-like repository: the PALMS experiment

Open Science (OS) is a powerful and novel paradigm to share knowledge across multidisciplinary scientific communities with the aim to improve the quality of science. One of the most important OS enablers are the FAIR principles, which involves the way to Find, Access, Interoperate and Reuse research data. In most of the cases published scholarship materials are not linked with computed datasets, open source software and/or virtualized computing environments and OS currently lacks of means helping to reproduce and eventually reuse cited results exploiting public or private distributed computing infrastructures (DCIs). Moreover, from the final user point of view, the best option would be the use of graphical user interfaces (GUIs) normally hosted by a Science Gateway (SG) built for a specific scientific community. The FutureGateway Framework (FGF) consists of a complete software toolkit made of different parts such as: source codes, utilities, libraries and APIs capable to comfortably build reliable Science Gateways and link them to one or more DCIs avoiding any usage complexity from the final user perspective. Moreover, since SGs based on the FGF are capable to keep track of who is accessing the DCIs, not only its usage ensures OS-compliant reproducibility and reusability but also provides a possible answer in protecting or at least simply tracking people who are accessing data and this is one of the aspects that today still makes the adoption of the OS a delicate matter. This work presents and explains how the use of the EGI's Science Software on Demand (SSOD) service, built using the FutureGatewayFramework in conjunction with the INFN Open Access Repository (OAR), based on Zenodo software, can reproduce/reuse the outputs of the agent-based Physical Activity Lifelong Modelling & Simulations (PALMS) experiment